Flat lamination pur adhesive is a pur hot melt adhesive specially developed for the composite lamination process of panels, similar to the “sandwich” multi-layer style. Pur hot melt adhesive is a moisture-curing reactive polyurethane hot melt adhesive. After heating, liquefaction, and cooling, it chemically reacts with water in the air to produce curing bonding force.
If you are looking for more details, kindly visit our website.
Flat lamination pur adhesive is used to bond different materials on the surface of the board to improve the appearance and practicality of the board. Plane flat laminating pur adhesive is commonly used in furniture factories, door factories, decorative board factories, new material factories, wallboard factories, floor factories, etc.
Pur hot melt adhesive has good adhesion to materials with smooth surfaces, such as stainless steel, aluminum, leather, rubber, etc. At the same time, it can also form good adhesion to porous materials, such as wood, ceramics, foam, etc., and has a very wide range of uses. For bonding smooth and porous materials to each other, it can have a strong cohesive force, which is an extremely important advantage of Pur flat laminating adhesive.
The boards commonly bonded by flat lamination Pur adhesive include: MDF board, particle board, calcium silicate board, SPC board, plywood, melamine board, carbon crystal board, aluminum honeycomb board, acrylic board, fireproof board, etc.
Common veneer materials for flat laminated Pur adhesives include: PVC film, PET film, PE film, veneer, leather, paper, aluminum foil, etc.
Compared with EVA hot melt adhesive, water-based adhesive, and solvent-based adhesive, the advantages of flat laminating pur adhesive are:
100% solid content, high viscosity, easy to apply.
Fast setting time, the glue can solidify after a few minutes after being applied to the board.
Solvent-free, environmentally friendly to people and the social environment.
Can be used for materials that are difficult to bond, with high bonding strength.
Excellent water resistance, high and low-temperature resistance, and solvent resistance.
Pur hot melt adhesive is an environmentally friendly adhesive. Pur hot melt adhesive is a single-component, hot melt curing adhesive that does not contain organic solvents. The raw materials do not contain pollutants, and long-term contact will not harm the human body. It complies with ROHS and halogen-free testing standards. No harmful gases or residues will be generated during use. It is green, environmentally friendly and renewable, and meets international environmental standards.
Flat laminating pur hot melt adhesive is waterproof. After being heated at high temperature, Pur hot melt adhesive will react with water in the air to form a solid adhesive film protective layer, thereby preventing water from penetrating into the board. The excellent waterproof performance of Pur hot melt adhesive is due to the chemical reaction characteristics of the glue itself.
The waterproof performance of Pur hot melt adhesive is usually evaluated by soaking the board in water. Boards with good sealing performance can be immersed in water for more than 10 hours without abnormalities. Because of the excellent waterproof performance of Pur hot melt adhesive, the durability of the board in a humid environment is improved.
It should be emphasized that Pur hot melt adhesive waterproofing is different from Pur board waterproofing. Pur hot melt adhesive can be waterproof, but the board after Pur bonding needs to achieve a waterproof effect, which is crucial for the processing of the board. To achieve a waterproof effect on the board, it is necessary to ensure that the surface of the board after bonding is not damaged and the gap between the glue and the board is fully filled.
When using flat laminating pur adhesive, the glue needs to be heated to 130-150°C through a melting device, and then the glue is evenly and evenly applied to the surface of the board using a roller. Then, a pressure wheel is used to press the veneer material tightly onto the board to complete the bonding.
This problem may be caused by the following factors:
1. Board problems (board moisture content is too high, board surface is contaminated, board is uneven, board temperature is too low).
2. Glue has poor high and low-temperature resistance.
3. Wrong process parameter settings (uneven glue application, insufficient roller pressure, uneven roller pressure, insufficient open time).
4.The operating environment humidity and temperature are too low.
5. The expansion coefficient of the veneer material is very different.
This problem may be caused by the following factors:
1. Plate problems (plate bending or deformation, uneven plate surface).
2. Glue viscosity is too high or too low.
Jiwei Product Page
3. Wrong process parameter settings (gluing temperature and speed do not match, roller pressure is uneven, and the pressing open time is too long).
4. Equipment and operation abnormalities (uneven glue application, conveyor belt slippage causes misalignment of the plate and material).
5. The difference between the operating environment temperature and humidity is large (such as low ambient temperature and high humidity, which causes internal stress on the plate surface and pulls the veneer material against each other).
6. The expansion coefficient of the plate and the veneer material are very different.
This problem may be caused by the following factors:
1. Pur adhesive is incompatible with veneer materials.
2. The moisture content of the board is too high.
3. The process parameters are set incorrectly (the sol temperature is set too low, and the pressing open time is too long).
4. The ambient temperature and humidity at the operating site are too low, and the glue cannot be cured.
1. Explain the boards and materials that need to be flat-laminated to the glue supplier.
2. Explain the lamination speed of the production line to the glue supplier to ensure that the development time of the glue can match the production process.
3. Communicate the ambient temperature and humidity of the operation site and provide the appropriate version of glue (conventional version, summer version, winter version).
4. Understand the glue supplier’s flat-laminated application experience, service level, product stability, environmental protection test report, etc.
5. The next step is the product price. But the lower the price, the better, which is related to the product performance and stability of the glue.
I believe this question will confuse some people who have entered the furniture industry for a short time. As a professional processing manufacturer of PUR lamination, We would like to share with you what is PUR hot-melt adhesive, the conventional application and its use characteristic.
The full English name of PUR hot melt adhesive refers to reactive polyurethane hot melt adhesive. During the lamination process, the PUR adhesive will go through several chemical reaction. The Solid PUR is firstly heated and then contact the moisture in the air. After the chemical reaction and curing process, and It forms stronger bonding between the two different materials. PUR has a highly flexible and strong adhesion, and is suitable for a wide range of regional climates.
In the curing reaction of PUR hot melt adhesive, water molecules are involved, and the bonding effect of the finished product is excellent. It has high bonding strength for various non-metallic and special materials. It has the properties of irreversibility, temperature resistance and water resistance.
PUR is innocuous, it does not contain Benzen, Formaldehyde or solvents, and does not produce harmful substance release during lamination. It leaves no residue on the finished products.
PUR machine production line is suitable for laminating different materials on the surface of various plates. Its hot roll is coated with reactive hot melt adhesive (PUR) on the surface of the plate. The surface base material and the substrate are aligned and overlaid, and hydraulic back pressure is applied to achieve the bonding effect instantly. Its glue has high adhesion, cold resistance, high-temperature resistance, waterproof, environmental protection and other characteristics.
Application: At present, the conventional applications of PUR hot melt adhesive are as follows: Flat panel lamination, cladding layer and edge sealing.
Substrate material: PVC foam board, density board, multilayer board, solid wood board, wood plastic board, glass magnesium board, aluminum-plastic board, plywood, particleboard, etc
Surface laminate material: PVC film (high gloss, Matt), PP film, acrylic sheet, HPL, aluminum sheet, PET, PETG, wood veneer, etc.
Adhesive: Moisture-curing reactive polyurethane hot-melt adhesive
As the solvent-free adhesive, PUR will not volatilize and emissions any solvent during the whole compound process. Therefore, the long drying tunnel is unnecessary when using PUR. It is truly environment-friendly and non-toxic adhesive.
With the global awareness of environmental protection, many counties improve the regulations of environmental supervision. Over the last ten years, solvent-free laminating technology in the European and the North American market has occupied an important place; Meantimes, the demand for PUR lamination is also increasing year by year.
As a professional processing factory of PUR lamination, Skyline Composites provides the best and the most convenient solution for your laminated board project.
Please call and us for more details.
The company is the world’s best PUR for Flat Lamination supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.